Below we have listed actually comments from feedback from our customers.  We hope that it gives you an idea of the quality of the services we offer.

---

Bose Lifestyle 20 Music System with CD Magazine and Eject Issues Feedback...
Dear Anyone Can Fix It,
Can't thank you enough for your help in solving my problem for my Bose Lifestyle Model 20. Not only that I saved a lot of money, It gives me a great pleasure of listening to my favorites music thru my Bose Lifestyle Stereo.

Your simple and precise instructions of how to fix it made it easier for myself to solved the problem. It made me feel good that I have done something that I never expected in my whole life.

Thank you again and I wish you the best for your future endeavor. Nice doing business with you.

Sincere yours,
Jo-Ann B. Pajarillaga - jo.pajarillaga@NOSPAMyahoo.com (remove NOSPAM for a valid email address)
Elizabeth, NJ

 

Ford Door Lock Repair:  This is Why We Are Called "ANYONE Can Fix It"...
Holy smokes ... If I didn't do it myself, then I wouldn't have believed it. The thing that took me the longest was actually getting the door open so that I could take the panel off in the first place....Thanks again! I also replaced the console cover (see www.FixYourFord.com) -- my wife was looking at me sideways as I had the cover on the table, and then I showed it to her after I was done.
 

We Give the Service that We Would Expect to Get...

Duane,
It worked! My icemaker just harvested ice for the 2nd time! I am so grateful for you and I wish there were more businessmen like you. You have acted in a way in which you have done everything to help me get my icemaker working. You got me easy to follow directions, you helped me with parts and then even tested the parts I sent back and determined it was more user error. You refunded my money and even shipped back my original motor.

Where can I post a response of my great experience with you? I think our economy would be in much better shape if there were more businessmen like you.

Very Grateful,
Brent - brent.burke@NOSPAMnmfn.com  (remove NOSPAM for valid email address)

 

Warm Refrigerator Repair....Mike's wife found this web site on a Google search; Mike got the instructions and fixed it all within the same day...

Duane,
Spoke to you this morning about my Maytag MFD2560HES. I was able to purchase a new motor for $37.00 less than one mile from my house. This was the easiest fix ever. Thanks very much. Will recommend this site to all friends.

Mike Telesca - Mike7Marg@NOSPAMaol.com (remove NOSPAM for a valid email address)
 

Ice Maker Repair - What this web site is all about...

Duane,
WOW!!! Just wanted to say thanks! Our ice-maker stopped working this past weekend and my family learned real quick how much we need ice!
So after surfing the internet about the problem, I ran across your repair instructions. And just like everyone else, I was hesitant to pay for repair instructions when I wasn't even sure of the problem. But after seeing my exact refrigerator on your site and reading your ad, I thought what the hek, I'll give it a try before I call the repair man. So on the way home from work, I stopped by a Sears Parts store and purchased the Module/Motor assembly for $77. I know this was a little more expensive than your site, but I didn't want to wait on shipping. Now I'm not much of a handyman and the tools you said I needed are pretty much the extent of my entire tool collection. But from start to finish, it took me about 25 minutes to complete the job! It would of been much quicker but I couldn't disconnect the dang wire harness! I thought I was going to break it or pull the wires out. But finally I got the wire harness to separate. That was the only small problem I encountered. The rest was cake. I did the repair right before bed so I didn't get to hear the first batch of ice drop, but it was great to wake up this morning and look in our fridge and find a full bucket of ice!! Just wanted to say thanks! Your clear and precise instructions really saved me some cash.

Thanks again!
Gib. - gilbert.m.perez@NOSPAMnasa.gov (remove NOSPAM for valid email address)
 

When Someone Locally Ordered a part for their Ice Maker Repair...
Dear Mr. Harrison,

Thank you so much for your excellent customer service and website! I was so surprised and thankful that because we live in the same town you personally delivered the part to me! In this day of computers an online ordering that is a rare thing. In addition to your clear concise details regarding the repair. As I explained to you I had the ice maker out of my freezer in literally 5 minutes and taken apart in another 5. As soon as you delievered the part to me I had it exchanged and back in the freezer within 10 minutes. Within a few hours the first ice cube hit the catcher! Thank you very much!
What a great website and what excellent service! I would highly recommend your website to everyone. Thank you again.

Sincerely,

Timothy J. Finn - tfinnpa@NOSPAMgmail.com (remove NOSPAM for valid email address)

I personally delivered Tim's part order to him within 24 hours of him placing the order since he lived just minutes away from me.  Tim was surprised to see the actual person responsible for this web site to be delivering his part.  He had told me that his father-in-law in Virginia told him about the web site www.AnyoneCanFixIt.com and that one of his coworkers had used the site.  Word of mouth is the best type of referral.  ~Duane Harrison
 

Feedback on the Warm Refrigerator Repair....

Hello-
Just wanted to let you know that our refrigerator repair was successful! I was able to find the part at a parts dealer store so that I didn't have to order it. My husband picked it up on the way home from work yesterday. We got started on the repair as soon as he got home. It took us almost an hour to do (husband is a former remodeler, so he's handy, but not familiar with working with fridge parts). I read the instructions to him (and held the flashlight). The instructions were very clear with the right amount of detail. The pictures were a great help! We were very pleased with our success, especially since the total cost (instructions + part with tax) was $51.96! Many thanks for providing us a low-cost, prompt repair opportunity.

-Karen Wyscarver

P.S. We have only been using our new Maytag fridge for a little more than 20 months when this happened.

 

Payment for Overhead Console Temperature/Compass Readout received at 6:55pm, at 9:09pm I received this email...
Hi Duane,
Your advice was perfect! The temperature/compass LED is again working in our F-150 in less than an hour. Directions were extremely simple and easy to follow. You just saved us $300—thanks!
Sincerely,
Cindi Klava - cklava@NOSPAMlifetouch.com  (remove NOSPAM for valid email address)
 

Savings Calculated on the Ice Maker Repair...
Duane,
I received the motor assembly today and installed it quickly with no issues.  I just heard the ice clunking a few minutes ago which was music to my ears.  I was about to pay someone $275 to come and fix the ice maker.

Thank you very much for saving me $193.51.

Regards,
Osama Elsafadi - osama@NOSPAMsafadi.com (remove NOSPAM for valid email address)

 

Praise on the Ice Maker Repair...
Duane,

The instructions were fantastic and worth every penny! I had the icemaker out and on the island in 10 minutes (I had a little trouble separating the electrical clip). Sure enough, I had the problem you described; only the gear wheel had not fallen off. Still, the spindle holding it had broken (what an incredibly poor design - the cynic in me says the design flaw was intentional). I have the part on order as I write this.

Bottom line.I'm glad I spent a little time "rummaging" thru Goggle. The whole experience was well worth my "token" investment. I love saving money!

Thanks.

Bill Thomas - Bthomas25@NOSPAMcomcast.net

Why wait? Do it yourself now...
Hi,
My ice maker had not been working for almost three months when we finally decided to call around. One guy seemed like he didn’t want the job (four weeks went by since I had called him), and we couldn’t afford a service call, part, and labor fees. Somehow I came across your site, and thought, well, there’s nothing to lose. So I took the ice maker apart this past Sunday night (I finally had time to mess with it), and ordered the part from a local appliance store. The hardest part about taking the ice maker apart was trying to separate the wiring harness! Anyway, I took apart the motor assembly, and sure enough, that white plastic gear was cracked. It only took the appliance store about a day to get the part in (the part was a little pricier than you quoted, about $90 w/ tax). The guy there told me that someone else had called that day about the same problem that I had! So I started reassembling everything about 9pm that night. It took about 20- 30 minutes to get everything put together and back in the freezer (I was on the phone while doing it). Just to make sure it worked, I emptied the ice bucket of the bag of ice we bought. With fingers crossed, I went to bed. When I left for work the next morning (6am), I took a peek in the freezer. I cannot tell you how happy I was- we had ice!!

I just want to thank you (as does my husband) for the information that you made available- the illustrations, the step-by-step instructions, even the likely problem and part number for it! Your “booklet” was very thorough and easy to follow. The entire repair was very easy to do, and took a minimal amount of time. I probably would’ve paid double by hiring someone to do this very simple repair! I just wish I had found your site three months ago!

Thanks again!

Selina Gonzales - SGonzales@NOSPAMCECCO.com

Another Satisfied Customer...
Received the motor assembly and installed. The ice maker is doing its 'clunking', what a great sound! Your instructions worked like a charm and you have another satisfied customer Duane. Thanks and have a good day!!

John Murphy - jrm59@NOSPAMhouston.rr.com

A Missed Opportunity on the Ice Maker Repair...
Due to a system delay in processing Brent's username and password (if you don't promptly get your username, please email us), Brent went forward with fixing his icemaker by calling a repairman to make the repair...After having the repairman repair the icemaker and then getting to look at the instructions after the repairman fixed his ice maker, here' s what Brent had to say...

Duane,
I glanced through your repair info and it turns out it was exactly what the repair man did. I had to pay him $220 for the service call, part and labor. I would have saved a lot of money using your website. Now that I know about your website, I'm going to use if for sure the next time something around the house breaks.

thanks,

Brent - Brent-b8ktig46et5@NOSPAMcheckout.l.google.com

 

Electronic Compass / Temperature Readout Not Working Feedback
Duane,
I used your Explorer Overhead Compass/Temp Display fix and it worked great.

Thanks, and great work.

Joel Trumble - jtrumble@NOSPAMusa.com

 

Electronic Compass / Temperature Readout Not Working Feedback
Duane:
Thanks for the information. I have been without the compass/temp system for over a year. I took it to a repair station and they said that they would get back to me with an estimate, they never did.

I didn't want to take the car to a ford dealer for they are very expensive.

Well your fix worked great. Got the job done quickly in less than an hour.  Before I reinstalled the unit onto the car, I hooked up the electrical to see if the unit worked. When the light came on, I gave a cheer. Now I can know what the temp is outside and in what direction I am going.

Thanks,
Steve - SCull04@NOSPAMaol.com

 

Electronic Compass / Temperature Readout Not Working Feedback

Thanks for the help. I had a broken tab on the gear shaft and noticed it a week ago, but the gear was in place and so I felt it still should work. I went through the debug sheet found in the refrigerator grill 3 times and could not find a problem. I could not get it to work because I removed the gear early on and did not know what position it should be in. When I saw your fix, I went to a nearby (20 miles) parts supplier and bought the assembly. The parts man knew exactly what I was talking about when I said that all that was broke was a 20 cent plastic part. He sold me his standard lifetime guarantee for $7.00 and said he would likely see me again in 3 - 4 years.

Your website is great and easy for me to follow. I left you feedback.

Thanks
Texas_Ben
 

ICEMAKER REPAIR WORKED!
Duane,
I have to say I was a little skeptical about buying your icemaker repair guide, however when I saw the exact picture of my refrigerator on your website I said, "What the heck, its $20.00 and he is guaranteeing that it will work." I did have to end up replacing the module.... I just heard the first set ice cubes drop.... music to the ears.

Thanks for your help.

Jon - jonp0515@NOSPAMyahoo.com  (remove NOSPAM for a valid email address)

 

Ice Maker Not Making Ice Repair
Duane,
I completed the repair this weekend. It took about one hour and all went very well, excellent instructions. The most difficult part was separating the little white tabs on the module. It just takes a little time and patients. I used a 15 watt soldering iron which worked perfect. Once reconnected the digital readout was working as new.

Thank you

Rich - rholland@NOSPAMgpworldwide.com (remove NOSPAM for valid email address)